How to add on several Rental Stations?

Installation of M12 and E16 in series requires adjusting switches and connect the cabinets with two Ethernet cables.

Bjorvika bryter pa kretskortet

To connect the E16 to the M12 the following must be done, referring to the picture:

1. On the left side of the blue relay card there is a switch that can be rotated. On M12 it must be 0 (zero) and on E16 it must be 1 (one).

2. On the right side there are two Ethernet connectors. An Ethernet cable must be connected between the M12 and E16. On M12 it must be connected to the socket labeled CU OUT, on E16 it must be connected to the socket labeled CU IN.

When this is done, the cabinets should talk to each other and the system.